Binary switching
Simple on/off control for standard outputs such as lights, pumps, accessories and other switched 12V loads.
Intelligent Power & Integration Systems
Smart Power Hub
Smart 12V power control without turning the install into a wiring mess. Smart Power Hub is a separate product-family page for CDM10 display and CPC power controller development, making standard 12V equipment easier to control, group, automate and integrate from a touchscreen or phone.
Smart Power Hub
One touchscreen. One phone UI. One central power-control point.
Replace scattered switches and loose remotes with a local control system for lighting, fans, heating, climate triggers and common 12V outputs. No internet is required for normal local control.
✓Control from CDM10 touchscreen or local phone web UI.
✓Centralise 12V outputs at the CPC power controller.
✓Use scenes, dimming, automation and remote learning from one interface.
Smart Power Hub
Cabin scene
EveningClimate
23.4Fan auto at 70% humidity
Lighting
4Grouped zones active
Network
LocalNo cloud required
Control Features
Make basic 12V equipment feel modern.
These are standard capabilities of the Power & Integration system, not separate product choices.
PWM output
Variable output for suitable dumb devices, such as dimming basic LEDs or controlling basic fan speed where appropriate.
Scenes and groups
Group outputs into scenes such as Evening, Night, Away, Cabin, Exterior or Reading Lights.
Hardware Architecture
CDM10 display up front. CPC power controller near the electrical bay.
The display handles the interface, local network and learned remote commands. The controller handles the real 12V outputs and monitoring. CAN keeps the modules talking cleanly.
CDM10 Display Module10.1-inch touchscreen, local Wi-Fi UI, IR/RF learning, temperature/humidity sensing and SD storage support.
CPC Power ControllerCAN-connected power node with MOSFET outputs, binary/PWM modes, battery monitoring and tank-level input support.
Designed around one power-control location, lighter display wiring, local 12V conversion and switchable CAN termination for real installations.
Remote Consolidation
Bring loose remotes into the same control system.
IR and RF learning lets the system capture the controls you actually use, then create a control widget for that device inside the touchscreen and phone UI.
✓IR learning for compatible devices such as TVs and Maxxfans.
✓RF learning for compatible devices such as common Chinese diesel heater remotes.
✓Three-press learning flow to verify a command before saving it.
RF heater control
Bring compatible RF devices, including common Chinese diesel heater remotes, into the same control panel without modifying existing device hardware or software, keeping their own control and safety systems untouched.
Setup Modes Included
All modes come as standard. They are starting templates, not product options.
Setup modes are included as standard. They are starting templates that are highly customisable to fit your application exactly. After setup, outputs can still be renamed, reassigned, grouped and configured.
Included setup mode
Boat
Starting template for marine labels such as anchor lights, nav lights and cabin lighting groups.
Included setup mode
Campervan / Caravan
Starting template for awning light, interior scenes, ventilation and heater remote control.
Included setup mode
Custom
Blank/flexible starting point for unusual builds where every output can be named and assigned manually.
Register Interest
Built for people who want modern control without messy wiring.
The Smart Power Hub is in prototype development. This page invites interest without replacing the existing helm display range.
Interested in Smart Power Hub?
Use the existing LH Electronics register-interest route to send an enquiry when you are ready.